Is it possible to change the IIS ports from 8222 to 80 and 8333 to 443
Is it possible to change the IIS ports from 8222 to 80 and 8333 to 443 on the web management interface? I tried just changing it on the IIS administration but it looks like there is a perl script that...
View ArticleEmulating SCSI Controllers
Hi, Is it possible to configure a virtual SCSI Controller withoutactually having the physical hardware installed on the host GSX Server. I assume not ??? I want to practice configuring RAID arrays. Can...
View ArticleGentoo 64-bit amd & GSX 3.2 - problem to login from remote console
I installed GSX 3.2 on Gentoo amd64 machine. Everything seems to be working except login from console.[/b]In /var/log/messages I recieve:[/b] Feb 1 17:22:34 localhost xinetd\[9150]: START:...
View ArticleBridged Networking - No route to host
Hi all,I have a Linux FC4 host system set up with bridged networking (no NAT and no host-to-host) I have a WinXP and a Debian OpenACS VM running with full networking configured and working properly (I...
View Articlertc: lost some interrupts at
Hello, I've just tried vmware server beta on my new AMD64 with Debian. took a while to set up but now it's working ok. My problem is that I get the following kernel message and my system respond time...
View ArticleVMControl error -8: Invalid operation for virtual machine's current state
We were running some VMs then we shutdown the server without shutting down each VM. We saw VMWare saying it was stopping them then it said it was unable to stop all VMs. After the reboot any VM we...
View ArticleClik here to view.
Add VMXNet and Heartbeat to Monowall!
I consider M0n0wall (http://www.m0n0.ch) one of the best VMs i have. Since it's appliance based and FreeBSD, vmware-tools won't install on it, so it doesn't have support for VMXnet. It runs on a...
View ArticleCannot open VMparport driver for LPT3: Overlapped I/O operation
I am running GSX Server 3.2.1. I installed a SIIG PCI Parallel Card into the server. I have added a VM parallel port defintion to a virtual machine running Windows 2003. When I try and connect to this...
View ArticleVMnet Config Question
The VMnet adapters on my host machine (Win2k3) are running @ 100Mbit. Is it possible to run them @ 1000Mbit? I want to use iSCSI initiated from the guest OSes to the host as a target, but I would like...
View ArticleWindows - write caching off
I recently set up a Windows 2003 64-bit server, with one virtual host, also Windows 2003 64-bit. The performance was terrible. Both servers would run, but when any load was put on them - copying...
View ArticleUpgrading VMware tools in a XP SP2 guest failed after upgrading from GSX
I upgraded GSX to VMware Server build 23869 on a Windows Server 2003 SP1 host. There were no problems during the upgrade. Then I upgraded the hardware of a Windows XP SP2 guest. Afterwards I tried to...
View ArticleAladdin USB Hasp Key not seen by guest OS
DetailsHOST: Windows 2003 STD EDT SP1GUEST: Windows 2003 STD EDT SP1Dongle manufacturer: Aladdin Knowledge SystemsDevice Desc: Aladdin Hasp KeyGSX Server 3.1 I've attached the dongle and installed the...
View ArticleDedicate NIC to VM (for 802.1x authentication)?
Our central IT organization is working on an implementation of wired 802.1x that requires user authentication and restricts access to one host per switch port. This effectively means that my virtual...
View Articledriver-irql-not-less-or-equal after moving guest
I can't seem to fix this memory dump problem. This guest has been transfered from a physical machine via restoring a full NTBACKUP with system state. Which "usually" works fine. In this case though,...
View ArticleHorrible network performance w/ Intel Pro 1000 adapter installed in host
I have a Debian Linux host and a Windows XP Pro guest. I have the guest's NIC bridged to the NIC on the host. The host is also running Samba and I have a drive mapped from the host inside the guest....
View ArticleWhat is VMware tools file system driver?
VMware Tools which ship with Server RC1 containa "file system driver".What is that for, how can it be used?
View ArticlePoor host IIS/CIFS performance when VMWare client OS running
We're presently running VMWare Server RC2 on a Windows Server 2000 SP4 host. Whenever I start a VMWare Svr client (Windows Server 2003 SP1) on the host, the performance of the web sites hosted on the...
View ArticlePPTP VPN Passthrough using NAT
HiI'm using Windows 2000 as a guest on ubuntu Dapper. I set up networking using NAT. Everything works fine, except I cannot connect t a PPTP vpn from the guest. When I try that, I get a hit on my hosts...
View ArticleICMP packet loss through guests?
I've got a strange problem with VMware Server that only affects ICMP traffic that I can tell so far. Prior to installing VMware, I had smokeping on the same physical server that worked fine for years....
View ArticleThe time of linux guest always goes slowly!
Hi all, I am running Vmware server 28343 on a Dell D610 notebook(PM-1.6GHz, 1G ram) and both the host and the guest OS are Redhat ES 4, all runs with single CPU kernel. I found that the guest OS will...
View Article