Bridging fails with Check Point SecuRemote
WinXP SP2 hostVIA Compatable Fast Ethernet Adapt (onboard) Win2K guestFedora-fc5-i386 guest Check Point VPN-1 SecuRemote NG Build 132 I could connect to the internet using NAT from the guest OS's but...
View ArticleNAT Port forwarding from a host adapter with multiple ips to a single ip
Scenario:=======I am looking to forward port 80 to all requests from ONLY a single IP address on the Host operating system (Win 2003 Std) to a guest os (Win 2003 Std). I currently have 3 IP addresses...
View ArticleHow do I create my own .FLP files ?
I need to create a .flp file to emulate a floppy disk in a NetWare server. Is there an app or tool to create a *.flp from a floppy disk ? GW
View ArticleError copying files or folders within virtual machine from host
Hi, Situation:I've installed GSX server 3.2 at a clean Windows Server 2003 (server). Within this Server I've installed a virtual Windows Server 2003 (client) as well.So a basic installation I guess....
View ArticleEmulating SCSI Controllers
Hi, Is it possible to configure a virtual SCSI Controller withoutactually having the physical hardware installed on the host GSX Server. I assume not ??? I want to practice configuring RAID arrays. Can...
View ArticleLogRPCPanic: can't get userlevel lock.
What do all these messages mean? Mar 08 06:20:57: vcpu-0| LogRPCPanic: can't get userlevel lock.Mar 08 06:20:57: vcpu-0| MONITOR PANIC: VMM fault: regs=0x2f40, exc=7, eip=0x51eb3Mar 08 06:20:57:...
View ArticleApplication Failure. hr = 0x80004003: (null)
I installed EXP 20923/Beta 1 on my laptop for testing and to learn about the product prior to using on the live servers (Laptop is WinXP with SP2). As per the info provided I logged on with the local...
View Articleunable to install vmware tools in Debian Sarge
guest OS :: Debian Sarge Installation of vmware tools fails at the stage where it unloads the pcnet32 module. I get the following message. unregister_netdevice: waiting for eth0 to become free. Usage...
View ArticleBUG: vmnet-bridge bond0.xyz VLAN - too long interface name, not working
I have GSX Server v3.2.1 running on Linux (RHEL4) host. I have bonded 2 NIC's as bond0, and created couple of VLANs.. bond0.12 and bond0.234 bond0.12 is bridged to vmnet0bond0.234 is bridged to vmnet2...
View ArticleCan't get ISA Server 2004 to run in VMware
I am having trouble running an ISA Server 2004 in a VMware guest. On my host (Win2k3 x64), I have two physical NICs - one connects to the WAN (192.x) and the other to the LAN (10.x). The WAN is setup...
View ArticleHow can I shrink LVM partitions?
I have installed a RHEL 4 guest OS on a non-preallocated disk, using automatic partitioning during the install. Now when I run vmware-toolbox to shrink the disk, only /boot is listed, none of the LVM...
View ArticleVmware client is so slow
We are facing problem with vmware client. It's so slow we can hardly do anything on it.Can anyone suggest how can we increase its performance.Thanks.
View ArticleVirtual Machine Failed To Start
I have just installed the new beta and I'm using win xp pro service pack 2.I have created the VM but when I try to start it I get the message listed in the subject. I cannot find any information for...
View ArticleC API: VixHost_Register/UnregisterVM
The API Reference guide says that VixHost_RegisterVM "adds a virtual machine to the local host's inventory." Please excuse my ignorance if this is an obvious question, but what exactly does that mean?...
View Articleno valid devices were found on which to create new file systems
Recently I started having trouble installing CentOS 4.3 guests on my VMware server. The VMware server host is running CentOS 4.3. I keep getting this error when I am prompted in the Disk...
View ArticleClik here to view.
Instructions for installing VMWare tools on OpenBSD (no X windows)
I tested this on OpenBSD 3.9, 32-bit on a 64-bit Linux host. The installation CD/floppy for OpenBSD 64-bit would not boot at all on my system with a Pentium D 950 CPU. I don't install X windows on my...
View ArticleCan't power up virtual machine (Failed to lock the file)
I just installed VMware Server 1.0.0 build-28343 on my Linux workstation (kubuntu Dapper) with MS Windows XP Professional as the guest OS. All was working fine but now I find I can't power up the vm....
View ArticleDNS Servers and standard Gateway via dhcpd.conf
I don t get it working to give DNS Server and standard Gateway parameter to my Guestvia dhcpd.conf....allow unknown-clients;default-lease-time 1800; # 30 minutesmax-lease-time 7200;...
View ArticleVMware-mui Permission Denied
1.0.0-28343 on CentOS linux 4.3 x86_64 ive had this working before but now i get 'Permission denied' when i try and log into the mui. /var/log/vmware-mui/error_log contains lines below any ideas ?...
View ArticleCrashing issues with VMware Server, frusterated...
Hi all, I have been trying VMware Server on CentOS 4.4 and Ubuntu 6.06 installations (both with minimum installed, no GUI). However I keep having an issue where after prolonged network activity with...
View Article